oeusnak

1. Insert the manufacturing endoscope into the checked out aspect, as well as the viewing hole ought to be on the identical degree since the eyesight.2. Contain the left and right ends from the lens with both hands, endoscopy instruments   and change the camera lens gently in every guidelines (will not use a lot of push) to create the field of look at obvious. Make sure that the lighting product is in working order.3. When you use in the dim surroundings, the powerful light flash light should be excited for lights when the surroundings is pretty dazzling, the strong gentle flashlight must be switched off and the aperture dimensions and major duration should be appropriately al...

1. The industrial endoscope probe has high requirements on the ambient temperature, and the probe will be damaged if the temperature is too high. Therefore, before inserting the probe into the engine, endoscope ,it must be ensured that the temperature of the inteal detection area must be within the allowable range of the probe to avoid damage to the CMOS detector assembly due to overheating.  2. The probe caot be folded, and the breaking radius is smaller than its bending radius, otherwise the probe will be damaged. There must be a certain interval between tuing on and off, such as more than 15 seconds, otherwise the life of the main bulb will be shortened and damaged. &n...